Train Stop Motor & Gear Housing

• Water Resistant
• Maintenance Free
• Oil Free
• Motor & gear box integrated into one unit
• Compatible with Twinco, GRS, & Assembled by Twinco

Printable PDF of product

Product Details

Unit Design Information

• Maximum drive down current at 110 VAC is 1.5 Amps
• Maximum holding current at 110 VAC is 0.75 AmpsFinal Output RPM 17 Renewable motor cableBuna-N O-rings used for water tight sealUnit is sealed, no user serviceable parts inside
• Unit weight 66 lbs.

Motor Design Information

• 1/8 Hp @ 90 VAC
  • Free run RPM’s 730-800
  • Free run current 0.67-0.73 Amps
  • Stalled current 0.95-1.15 Amps
  • Minimum torque 5.3 oz.-ft.
• Completely Encapsulated Stator Winding
• High Temperature Kapton winding insulation
• 3000 VAC insulation withstand test to ground for one minute

Gear Section Design Information

• Gears plated with Hi-T-Lube® dry-film lubricant
• Formsprag® Overrunning clutch permanently lubricated
• NSK brand, premium grade, double shielded ball bearings throughout
• Hardened stainless steel output shaft
• Gear Ratio 45:1